Printable View
Dear
Can somebody help
Hurco then i start about in random time enters freeze and only shut donw machine help
here in video you can see everything that hapens.
https://www.youtube.com/watch?v=01x7ktoAnfo&t=22s
ATC no it is take off for repair.
checked voltage it is fine.
change hard disk to other (not helped same problem)
that left to check
Computer ram (can it be?)
Input output modules.
Can somebody suggest that to check and were to search
Check the CPU for burst capacitors.
Remove all but 8MB of RAM. Swap around to see if the fault clears.
Remove all I/O cards and the Canbus Controller (the keys won’t function with this removed).
1. RAMQuote:
Originally Posted by bloke
i take off all ram and add just one stick, but it not works if i add 2 then it works.
2. On this board no capacitors.
Now will try to connect extra monitor directly to pc
Unconnected I/O cards and Canbus.
Optional i buy all new relays. And add them.
Problem was wire that make shorth then we found it was ok, now just have one HDD imige copy