What is the difference between Delcam's Duct-Post and PM-Post? Is one a subset of the other? Which one do I need to look at to convert Powermill toolpaths to and NC file?
Thanks,
Printable View
What is the difference between Delcam's Duct-Post and PM-Post? Is one a subset of the other? Which one do I need to look at to convert Powermill toolpaths to and NC file?
Thanks,
There is no difference for converting toolpaths. Delcam's duct-post is the default machine post processor where you can make some changes. In the PM-Post you can create the same post processor as the default one but also you can create a completely new post processor
A friend of mine found a Powermill Post Processor option file that works between Powermill and Mach3 mill.
Use at your own risk since I did not try out all of the features in it. But, I did try it out and it does work for me.
The post processor option file is attached.
Thanks,
I for Mach2 a pos-pm at the post but I can not coverter for the pmopt opt.
Solutions? :drowning:
I am uploading an updated version of the PowerMill Post Processor option file for Mach3. In the older version that I posted on this thread, a G28 command was used that will use the Machine Coords to go to X0Y0Z0 which messed me up sometimes. This new version no longer uses G28. Instead, I had the Z height increase to move the tool bit out of the work area at the end of the gcode file.
Also, use this Post Processor option file at your own risk since I will not be responsible for anything.
However, I do personally use it myself.
Thanks,
Here is an updated PowerMill Post processor. It was modified using Delcam's PM Post Processor 4.7.00. I performed simple tests using PowerMill 2010 and Mach3.
This version is for Mach3 controller and fixes some of the IJK coordinates system (now uses absolute rather than incremental values). There are some other changes to make things work as expected.
Again as always, use this at your own risk. I cannot be responsible for anything.
good question you might have better luck at the Delcam forum
I did not see a Mach3 post processor on the Delcam forums site. If someone sees it, can they please provide a link or post it on this site?
Hi,
Hey can some body help me with conveting a .opt post to .pmopt.
My current .pmopt outputs my rapid moves as G1 instead of G0.
Any one knows what part of the .pmopt I need to tweak to get G0 outputs for my rapid moves
.i have made a tool path for CNC machine for milling operation, so that i can run the machine and finally made my component....but now i want to do simulation of that process.
my problem is that i want to extract the Co-ordinates value in tabular form from the power software. but i dont know how can i??
Could u plz help me in this?
i have made a tool path for CNC machine for milling operation, so that i can run the machine and finally made my component....but now i want to do simulation of that process.
my problem is that i want to extract the Co-ordinates value in tabular form from the power software. but i dont know how can i??
Could u plz help me in this?
Edit/Delete Message