Would anyone have a CAD file of a skull in 3D? A DXF would be great. I would make one, but it's out of my league to create such a drawing.
The one below is what I have and it's no good for contouring.
Thanks
Printable View
Would anyone have a CAD file of a skull in 3D? A DXF would be great. I would make one, but it's out of my league to create such a drawing.
The one below is what I have and it's no good for contouring.
Thanks
3D cafe has a few.
Gerry
If you have Bryce 5 there is one in the terrains section. Attached is a pic of it cut out of foam on my cnc router its around 6" wide and 2" thick.
Donny
I only have a BobCAD v19 and Dyna CAD.
Doh!
Try this:
http://home.comcast.net/~ger21/CNC/skull2.zip
Gerry
Hey to bad that skull does not have surfaces, would be killer.
The one I posted you can get as an obj. model with surfaces from 3d cafe.
http://www.3dcafe.com/asp/anatomy.asp
hellskul.zip
Those are interesting, thanks for the links they look like they will work out.
thanks again,
Kenny