Re: Chester 20v and G0704 comparison
Dear shooter 123456.
Many thanks for the advice regarding the 2005 and the Z axis ballscrew.
And for taking the time to pull out the spec sheets, do the maths.
As I live in N Scotland. Will now collate all advice, measure & draw up then find a supplier.
Many thanks again.
Yours
Mechan6
Re: Chester 20v and G0704 comparison
Quote:
Originally Posted by
Mechan6
then find a supplier.
When you've found the needed lengths, find linearmotionbearings2008 on eBay. I can't remember his direct email address. He is the one most recommend for ballscrews. He can machine the screws to your drawings as well. He has both single and double nuts.
Re: Chester 20v and G0704 comparison
Dear Stigoe,
Many thanks for the supplier information.
Will try them.
Best wishes.
Yours
Mechan6