Can anyone provide their experience with either the Performance Motion or IMService TP-100 probe? They appear to be similar or the same. Don't have full specs on the Performance Motion for comparison. PM does offer probe without the toolsetter, which I don't need, at lower price. The IMService probe indicates 5-contact points; don't know about PM's. Looking for input from users of either probe. Would like to purchase soon.
Take a look at this one too. Digitizing Probe 4 CNC Sherline Maxnc Taig Plasma Cutter Mill Router ENGRAVER | eBay
This is the one I'm using in this video and it works very good.
2.5D Edge Probing & 3D Digitizing In Mach3 R3.043.066 - YouTube
Jeffery926, thanks for the reply and suggestion. From photos and description, this probe appears to be same as the Performance Motion (which is $15 less at $185). Hoping to have input from an actual PM or IMService user.
Does where it's purchased make a difference to you, or the probe itself? Looks like all three may be the same probe, except if you read the description about the probe contact reliability of the one I purchased.
Probe
You can get it for $4.00 cheaper off there web site.
Your welcome. :cool: