Alarm 144

Hello guys
I have a Haas VF3 with a Haas controller. Yesterday the following error message came up_
‘ALARM 144
Machine will stop Functioning in 99,9 h
Call Dealer for Unlock Code’

I got a ‘Bill Code’ with my bill.
Where do I have to enter it?

Hello
I have done it in the past and I think I remember the following:
Enter emergency shutdown- setting/graph button- onto serial number- enter Bill code- press ‘write’- done!!

Regards Ogelle

Hello dekas
The bill time code is entered with the serial number- usually you should have an instruction with it that tells you where and how to enter it.
Regards Michael

Hey

I just can’t find the input box for the serial number- that’s my problem.
I can change the name, the IP address and many others but no the serial number???

The serial number is under setting no. 26- button Setgraph – General- no. 26

Regards
Michael

Hello
I had a look at work today. Approach reference point- open writing security (setting7)
Emergency shutdown- serial number (setting 26) – enter bill code- write enter
Close writing security- finished.
Regards Ogelle