Hi. I have an OKUMA LCC15 on the OSP500L-G, built in 1995. When turned on, 13 CPU-ALARM INTERRUPT ERROR appears on the screen. I ask for help in troubleshooting this problem.
Printable View
Hi. I have an OKUMA LCC15 on the OSP500L-G, built in 1995. When turned on, 13 CPU-ALARM INTERRUPT ERROR appears on the screen. I ask for help in troubleshooting this problem.
13 CPU-ALARM INTERRUPT ERROR
D0=001E845D D1=00000000 D2=00000000 D3=00000000
D4=00001FFF D5=FFFF0000 D6=00001FFF D7=0000FFFF
A0=00000000 A1=00000000 A2=00000000 A3=00000000
A4=00200000 A5=00000000 A6=00000000 A7=000004F6
US=00000000 SR=00002404 PC=0FB02C6C
check if all ( including peripheral ) units are electrically connected.
What's the story? Was the lathe running and stopped out of a sudden?