How to get a Mach3 post proc. for Mastercam 2022 ??
1st, should be; does anyone knows if there such thing, a Post P from MC-2022 to post on Mach3 ?
Tried to migrate from MC2017 to MC2019.....will simply not, MC 2019 to 2022...seems Mach 3 will not be taken ??
Any leads, direction would be much appreciate.
Thanks
Re: How to get a Mach3 post proc. for Mastercam 2022 ??
Re: How to get a Mach3 post proc. for Mastercam 2022 ??
Hi Robert, did you have any luck with this?
Re: How to get a Mach3 post proc. for Mastercam 2022 ??
Hi,
Mach, 4 more so than 3, but both follow Fanuc21i.
If you can't find a Mach specific PP then try Fanuc21i. Mach4 is particularly close and by design.
All development on Mach3 ceased eight years ago, maybe Mastercam gave up on it.
Craig
Re: How to get a Mach3 post proc. for Mastercam 2022 ??
Thanks Craig....but tried that one and....not being a "gooroo" behind those (post processors programing !!)..... there's "defiantly" a difference in such.= posting with that has "glitches" and act / react (while in motion) not right ?!
There "must" be a better alternative ( I imagine / assume).... so many Mach3 users, surly some are also using M/C and have issue or soled this ?
Cheers...thks mate