1 Attachment(s)
How to show Rpm instead of frequency? FVD yl620-a
Hello, sorry my english (google translator).
I really need your help.
I bought a Fvd and I can't show the Rpm on the display, just shows the frequency. In the manual does not say where to change this option, and already read in several places to change the parameter p144, but in my model this parameter does not have.
https://pt.aliexpress.com/item/32807...2742b90atvjpGQ
110v 2.2kw
Thanks a lot if anyone can help me
Re: How to show Rpm instead of frequency? FVD yl620-a
Looks like set P00.24 = 6
Maybe also need to adjust P00.23, but I think not.
Re: How to show Rpm instead of frequency? FVD yl620-a
Thanks, I did that what you said, I had tried that too.
But it still didn't work.
In P00.23 it only adjusts from 0 to 100.
in P00.24 I put in 6. Now shows on the display SP 1.
There must be somewhere else to change, but I don't know where, this is hard.
Re: How to show Rpm instead of frequency? FVD yl620-a
Hello, I have the same vfd did some one find out how to display rpm instead frequency on yl620-a?
Re: How to show Rpm instead of frequency? FVD yl620-a
Quote:
Originally Posted by
agflex
Hello, sorry my english (google translator).
I really need your help.
I bought a Fvd and I can't show the Rpm on the display, just shows the frequency. In the manual does not say where to change this option, and already read in several places to change the parameter p144, but in my model this parameter does not have.
https://pt.aliexpress.com/item/32807...2742b90atvjpGQ
110v 2.2kw
Thanks a lot if anyone can help me
The DISP should select the RPM, just Press it until the RPM led is on then it will show the RPM
You could try P00.24=9 this will give you all the options
Re: How to show Rpm instead of frequency? FVD yl620-a
Quote:
Originally Posted by
mactec54
The DISP should select the RPM, just Press it until the RPM led is on then it will show the RPM
You could try P00.24=9 this will give you all the options
Hi mactec54, Really appreciate for the reply,
I press DISP button 50 or more times no response, and I tried P00.24=9 displays u 9, and P00.24=6 displays SP 1, and there is no RPM display
Re: How to show Rpm instead of frequency? FVD yl620-a
Quote:
Originally Posted by
shakil1740
Hi mactec54, Really appreciate for the reply,
I press DISP button 50 or more times no response, and I tried P00.24=9 displays u 9, and P00.24=6 displays SP 1, and there is no RPM display
Set it back to the default=0 and try the DISP again I'm not a fan of this VFD Drive as many users have had problems with them
1 Attachment(s)
Re: How to show Rpm instead of frequency? FVD yl620-a
Quote:
Originally Posted by
Cosimino71
If on 00.23 you put 400hz the spindle marks 6000 rpm as the maximum speed, if you put 60hz the spindle reaches 24000 rpm
The P0023 you have a choice as to what you want and how to use it ( it is a % setting ) it has nothing to do with the main frequency
Re: How to show Rpm instead of frequency? FVD yl620-a
Quote:
Originally Posted by
Cosimino71
Hello as I am new in this forum and I would like to understand my cnc machine well I followed the discussion regarding the vision of the spindle speed and I set those parameters to be able to see it the main parameters are on 400hz but I notice that the spindle heats up after 15 minutes even if I take it over six thousand turns my spindle and the one in the attached photo and I have a YL620-A vfd
Air cooled spindles most can not run at 6000 RPM the minimum speed is normally in the 12,000 RPM to 18,000 RPM or they will over heat from low air flow
Some Parameters may help, what Parameters have you set
Re: How to show Rpm instead of frequency? FVD yl620-a
Quote:
Originally Posted by
Cosimino71
Which parameters determine the heating of the spindle and its good functioning so I check and let you know the ones that I have set
By your list you have all the important Parameters set correct, some of these air cooled spindles do get hot, that is why the water cooled spindles are better have you been able to check what the temperature gets too