1 Attachment(s)
Does anyone have any experience with this Amazon CNC Controller
I have a 3x4' homemade CNC, using two ball screws on the Y axis, acme threaded X and Z axis, and linear rails and trucks on all axis.
Using Gecko 251X drivers, Mach3 and Vectric VcarvePro 8.5.
Has anyone used the below Controller cards sold by L-STAR MOTOR from Amazon. I'm considering clanging my Controller boards to a more modern board at an attrive price.
It is a 5 Axix Mach3 Stepper motor comtroller board, breakout board interface fot CNC
Router, engraving, milling machine.
Thanks
Mr Chips
Re: Does anyone have any experience with this Amazon CNC Controller
Quote:
Originally Posted by
Mr.Chips
I have a 3x4' homemade CNC, using two ball screws on the Y axis, acme threaded X and Z axis, and linear rails and trucks on all axis.
Using Gecko 251X drivers, Mach3 and Vectric VcarvePro 8.5.
Has anyone used the below Controller cards sold by L-STAR MOTOR from Amazon. I'm considering clanging my Controller boards to a more modern board at an attrive price.
It is a 5 Axix Mach3 Stepper motor comtroller board, breakout board interface fot CNC
Router, engraving, milling machine.
Thanks
Mr Chips
Many have used similar Breakout Boards to this I not sure you need one with ( 3 ) relays on it you only need ( 1 ) for your spindle
Re: Does anyone have any experience with this Amazon CNC Controller
Thanks,
That’s correct, one is enough.
I was hoping to find someone that has used this board, they have good reviews on Amazon.
But at $25 it’s nit a bank buster. I’ll give it a couple of days before I order one.
Thanks