-
Hi guys how are you doing?
Control system iTNC 530 Software Nr.340491-03 SP9
When I press TOOL CALL on the control system, then the soft keys come up and GOTO doesn’t work either.
However I believe that at least GOTO works since the controller TNC 435.
With the programming space, three soft keys come up when pressing TOOL CALL: tool no, tool name and select
Who know from what software version it works or what MP is responsible for that?
What button do I need to press
Thank you a lot
-
Hello Hans-Michael
MP7483 is responsible for the determination of the tool names and numbers that can be used with a TOOL CALL or TOOL DEF.
0 = Name and number allowed
1 = only name allowed
2 = only number allowed
I think you can use tool names since the 426/430.
GOTO button with the TOOL CAAL set- what should that do? Doesn’t say anything to me.coangry.gif
The button is without any function- it’s only active after pressing the softkey ‘SELECT’
The ‘’select’’ only exists since software version 340494-05, ( the current version is 340494-06-SP2)