Printable View
Hey guys. First post here. Iam having trouble hooking up my vfd to Mach 3 and leadshine any help woild
be great. On my other machine I used a different vfd and rs345. Not sure I can do that with fuling. If I can how. I rather just hook it up without. And I have know idea if my settings are wrong in Mach. Thanks
Check out this page.
3-Drive DIY NEMA 23 Electronics Kit | CNCRouterParts
Thanks been all over that can't figure out.
Okay, try this.
https://www.tormach.com/tormach-prod...t_name=Manuals
Not sure why tormach site would help
Specifically, the 440 uses the same drives and also has a VFD I think.
It has wiring diagrams in the back of the manual.
You did not state specifically what kind of trouble you are having. I am just offering resources that may or may not contain anything that could help.
I appreciate all the help I was just confused. So I really need a wiring diagrham. And Iam using a leadshine mx3660 with fuling vfd. The way I wired now is v1/acm to leadshine 0-10 and s1/dcm to leadshine output 1. Not sure if vfd settings or Mach settings are right. Or wiring.