Okuma servo motor

Our Okuma LR10-M had a bl-ms125e-60t driven tooling motor that just recently had a magnet come off and wrecked the insides of motor, So do any okuma experts on this forum know if it possible to replace original motor with bl-ms125e-60tna or bl-ms125e-30t motors, The cost of replacement from okuma is more than machine is worth.

Thanks

Quote:

---

Originally Posted by geoffeyles

Our Okuma LR10-M had a bl-ms125e-60t driven tooling motor that just recently had a magnet come off and wrecked the insides of motor, So do any okuma experts on this forum know if it possible to replace original motor with bl-ms125e-60tna or bl-ms125e-30t motors, The cost of replacement from okuma is more than machine is worth.

Thanks

---

Better change all motors, drivers and CNC with a brand new CNC kit.

Thanks very very helpfull

What is the price of the motor?
Might be worth at least a try, they can't be that far apart.

They want approx £15,000 for motor , The lathe only cost us about £12,000 4 years ago

What is the source of these motors you quote, ??

"replace original motor with bl-ms125e-60tna or bl-ms125e-30t motors"

Motors are on ebay

You could check with the seller and confirm they have the same motor connector configuration

I have thanks, Already purchased the 60tna motor

Quote:

---

Originally Posted by geoffeyles

They want approx £15,000 for motor , The lathe only cost us about £12,000 4 years ago

---

That seems way over priced. I just looked at one on eBay for about USD$1300. https://www.ebay.com/itm/Okuma-BL-MS...-/303113991458

Just yesterday I ordered a complete new 7.5kW servo motor, drive, and all cables, to replace my lathe spindle motor, for about USD$3300. Automation Direct.