Alarm 300 APC on Colchester Storm A-50 Fanuc 21i-T
Hello all. I also posted in the colchester lathe section but notice a bit more activity in here.
My lathe used to tell me when the batteries were low. But I converted from Lithium expensive to D cell affordable and I just lost the ref. positions.... Guess I'll just change the batteries every year from now on.
Can anyone help me with the procedure to manual reference position return the axis?? Any help would be greatly appreciated.
The controller
http://imageshack.us/a/img21/6950/8g3b.jpg
Thanks in advance.
Claude
Re: Alarm 300 APC on Colchester Storm A-50 Fanuc 21i-T
I have a Storm A50 and tried to use that pdf posted with this thread. What things did you tweek? When I enter the 00110000 into parameter 1815 it doesn't change the parameter even if I cycle the power off and back on. And when I used the suggested 1 000 000 (added spaces for readablity) as the overtravel values, I get a 309 APC ALARM: X Axis ZRN Impossible alarm. When I re-turned the write protect parameter back to 0 as the pdf instructed it didn't change the 1320 parameter to the new suggested value of 1 000 000.