-
EZCAD2 for Windows 10 OS fiber laser engraving machine
I purchased a fiber laser engraving machine from china a few months ago. EZCAD 2 kept crashing on the Windows 7 computer they sent me. Finally im guessing some of the components in the computer they sent with the machine were less than adequate and the computer took a turn. I have since purchased a laptop for use on the machine only. I was hoping someone could point me in the right direction getting software to work on windows 10 OS so that i have a reliable computer to work off of. Very new to fiber laser but the possibilities are endless and am willing to handle the learning curve. I just need a little help here and there. Thanks in advance!
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Hello,What's your version of EZCAD software?We have a software and can send it to you.
-
Quote:
Originally Posted by
Opticlaser
Hello,What's your version of EZCAD software?We have a software and can send it to you.
I have 2 versions. 2.7 and 2.14 I believe. My windows
10 is 64 bit
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
The EZCAD version 2.14.9 is compatible with Win10 64 bits.Do you have the installation file?I have but I don't know how to upload the file this page.
-
1 Attachment(s)
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Here is a video to install EZCAD2 to computer with Windows 10 OS.
https://youtu.be/3_PnlOZsh7A
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
i need the drive of ezcad for window 10 - 64 bit please
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
OK.Here is a file which include drive and software EZCAD 2.14.10.And here is a video to show how to uninstall the drive.
https://youtu.be/R1ohAMcFWlw
Sorry the file is too large and I was thinking it was uploaded.You can send a personal message to me.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
hi,I tried to acces your link but is missing I can't find it can you please send me the link because I have win 10 and it's not working :( and it gets so frustrating when whenever I try it showes "no dongle" so If you could help me it will be great.Thank you
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
Hi, i have the same problem with Ezcad on Windows 10 64-bit.
I tried versions 2.9.9, 2.14.9 and 2.14.10. I installed drivers from your links and all the time doesn't works.
Do you have any solution?
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
Here is the software.
Hi i just recently purchased a 30W Fibre Laser marking machine, and i installed the software Ezcad2.14.9 software but it still says can not find dongle and i can only use in demo mode??
Can anyone help me?
Cheers
Tony
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
I test the link and I can download it without problem.If you need the driver or software,I can send you privately too.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
I test the link and I can download it without problem.If you need the driver or software,I can send you privately too.
same problem here in Poland with WIN10
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
i've installed ubs driver but still shows info about missing dong
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Can you download the driver and software?
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
hello
yes, i can and i did it.
i updated driver as shown on YT movie but already have te same driver.
Unfortunately software still says about missing dong
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
I have Ezcad2.9.9 and It was working fine with windows 7. and Install Windows 10 64bit version and when software opening it's saying "Can not find dongle.demo state".
when i try to engrave it's saying "Current LMC Board is not for fiber Laser"
And parameter setting F3 hardware info showing "invalid board"
but i tried to work with windows 7 again (old hard drive) it was working file.I think problem with windows 10 64bit. installation issue.
Does anyone have Ezcad2.9.9 software and drivers for windows 10 64bit?
or any other solution for it?
Thank you
from Sri Lanka
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
HOLA SERIAS TAN AMABLE NECESITO EL SOFTWARE DE EZCAD2 PARA MI PC WIN 10 DE 64 BIT INSTALÈ UNO PERO ES PARA EL WIN8
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
software EZCAD2 PARA WIN 10 64 BITS .- Instale este pero solo DEMO PRUEBA . SALE Q ES VESION WIN 8 Y NO PUEDO INSTALARLO PORQUE TAMPOCO ME APARECE OTHER DEVICES. ESPERO SU RESPUESTA . SALUDOS !
-
Quote:
Originally Posted by
Andun
I have Ezcad2.9.9 and It was working fine with windows 7. and Install Windows 10 64bit version and when software opening it's saying "Can not find dongle.demo state".
when i try to engrave it's saying "Current LMC Board is not for fiber Laser"
And parameter setting F3 hardware info showing "invalid board"
but i tried to work with windows 7 again (old hard drive) it was working file.I think problem with windows 10 64bit. installation issue.
Does anyone have Ezcad2.9.9 software and drivers for windows 10 64bit?
or any other solution for it?
Thank you
from Sri Lanka
Did you sort this out. I’m having exactly the same issue. Just installed a brand new control board and the problem is still the same.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
maciej_rz
hello
yes, i can and i did it.
i updated driver as shown on YT movie but already have te same driver.
Unfortunately software still says about missing dong
Did you fix your issue, I'm having exactly the same problem.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
For any issue of your <a href="https://www.chineselaser.com/3d-laser-marking-software-product/" target="_blank">laser marking software EZCAD</a>, you can try to contact the developer, JCZ.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
LILYHERE
HOLA SERIAS TAN AMABLE NECESITO EL SOFTWARE DE EZCAD2 PARA MI PC WIN 10 DE 64 BIT INSTALÈ UNO PERO ES PARA EL WIN8
Hola Lily
Tengo el mismo problema pudiste resolverlo de alguna forma????
llevo 1 semana tratando de solucionar esto y me estoy volviendo loco.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Airskinz
Did you fix your issue, I'm having exactly the same problem.
The USB driver needs to be updated while the laser is connected and in the full on state, as the control card acts as the "dongle". If you are receiving a missing dongle message, it means that the computer is not seeing the laser. Check that your laser state is on and try again.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
He, was d6wn36ad driver from your given link but i see it's not working. i am using windows 10. Please need your help.
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Heelo Iaboni,what's the version of your software?How's your control board looks like?Could you send a picture?
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Can someone send me the link to download ezcad2v14 plz. Thanks in advance
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
-
Quote:
Originally Posted by
Kags
I purchased a fiber laser engraving machine from china a few months ago. EZCAD 2 kept crashing on the Windows 7 computer they sent me. Finally im guessing some of the components in the computer they sent with the machine were less than adequate and the computer took a turn. I have since purchased a laptop for use on the machine only. I was hoping someone could point me in the right direction getting software to work on windows 10 OS so that i have a reliable computer to work off of. Very new to fiber laser but the possibilities are endless and am willing to handle the learning curve. I just need a little help here and there. Thanks in advance!
Boa noite
A pen onde vinha o ezcad2 não é reconhecida.
Formatei o meu pc e fiquei sem o software ezcad2.
Cada máquina laser fibra 20w racyus tem o seu software ou o ezcad2 dá para qualquer maquina laser fibra 20w racyus.
Pedia uma ajuda a ver se consigo resolver esta situação dado que a máquina assim não funciona.
Obrigado
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
EZCAD
For any issue of your <a href="https://www.chineselaser.com/3d-laser-marking-software-product/" target="_blank">laser marking software EZCAD</a>, you can try to contact the developer, JCZ.
I have three machines and on one I keep getting errors on the lmc driver
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
please, send me driver and sofware of control board laser mark V1 for win xp. thank you very much
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
Here is the software.
thnks...........
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
Opticlaser
Here is the software.
hi we are trying to use ezcad2.14.11 and it wont let us use the sent software we have win 10 can you help us??
thank you
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Quote:
Originally Posted by
ABCOSTA
Boa noite
A pen onde vinha o ezcad2 não é reconhecida.
Formatei o meu pc e fiquei sem o software ezcad2.
Cada máquina laser fibra 20w racyus tem o seu software ou o ezcad2 dá para qualquer maquina laser fibra 20w racyus.
Pedia uma ajuda a ver se consigo resolver esta situação dado que a máquina assim não funciona.
Obrigado
bom dia Já resolveu o seu problema? também comprei a semana passada uma Fiber Laser da china e ainda não consegui que funcionasse.
Filipe-Portugal
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
o red pointer funciona, se fizermos um rectangulo ele apresenta-o na base mas depois não marca nada. the red pointer works, if we made a square he shows it in the worktable but then not marking nothing..
-
Re: EZCAD2 for Windows 10 OS fiber laser engraving machine
Dear friends,
I have got the same problem:
Windows 10
Ezcad 2.14.11
FBLI-B-LV4A
The drivers are in X64AMD_LmcV2u, which containes 4 files (Lmcv2u, Lmcv2u.sys, lmcv2uX64 and WdfCoInstaller01009.dll)
I find this youtube video https://www.youtube.com/watch?v=n5YGY0wOgI4&t=3s, which has windows 10, Ezcad 2.14.19 and uses the driver pacvkage JCZDriverAllInOne. This has 6 files in it (JCLMC.Lmc.sys,lmcDrv, LMCUSB.sys, Lmcv2u.sys and WdfCoInstaller01009.dll)
I have these drivers but not Ezcad 2.14.19.
Is this the fix?
I tried updating the drivers with the board connected as indicated above but with no results..
Does somebody has a 2.14.19 download link?
Best regards,
Paul