I have a problem using Drag Knife
Drag Knife
I have a problem using my CNC with the Aspire Program.
I have been watching all the tutorials and reading all the comments but my drag knife doesn't turn with the lines and get broken. I follow all the steps and the problem still be there.
How can I control the elevation of the drag knife in Z ,for change the lines, because in the Aspire program I couldn't find the Z's set up?
I will appriciated the help, and if somebody knows how fix it, please send me screen shoots, pictures or videos for how you set up the elevation of the drag knife in Z.
Thank you very much!
Maximiliano
Re: I have a problem using Drag Knife
#1 you need the gaget for the drag knife in aspire also there might be some tips here
donek tools dragknife - YouTube donek drag knife using aspire 4.0 may30_13
donek's drag knife cutting plastic and cardboard with aspire 4.0 - YouTube donek drag knife using aspire 4.0 may 30_13
Cutting Vinyl and Coroplast with a Donek Drag Knife - YouTube from dnek how to setup for a cut using gaget in aspire
#2 i found the program sheetcam was better control of the drag knife direction and depth of cut i had a video but cannot seem to locate it right now
it actually would do a veneer inlay cut