Fusion - Fagor 8055 Message

Hello,

I am new to CNC and have a new knee mill with a Fagor 8055 control. I am learning Fusion specifically for this purpose and have used it to for the first part I have designed. I used the only Fagor PP that I see in Fusion and when I moved the file to memory on the machine and tried to do a dry run of the the file above the material, I received a message seen in the attached photo.

My machine is a basic 3 axis "conversion" of a Bridgeport type, although it is new. Any assistance here would be appreciated.

Thanks very much..

Steve

Quote:

---

Originally Posted by Shop-Dog

Hello,

I am new to CNC and have a new knee mill with a Fagor 8055 control. I am learning Fusion specifically for this purpose and have used it to for the first part I have designed. I used the only Fagor PP that I see in Fusion and when I moved the file to memory on the machine and tried to do a dry run of the the file above the material, I received a message seen in the attached photo.

My machine is a basic 3 axis "conversion" of a Bridgeport type, although it is new. Any assistance here would be appreciated.

Thanks very much..

Steve

---

Hi Steve

I’m not familiar with this error, but I will be happy to help you troubleshoot and edit your post processor if that is what is causing the problem. I specialise in post processor editing with Fusion 360.

Has the machine run correctly with other CAD software?

Drop me a line: [email protected]