It will index to any other tool except tool 4.
On the main screen, I can see T04 but the turret will not rotate.
If I ask for any other tools, the turret will index without any problem, any idea.
Thanks, Jeff
Printable View
It will index to any other tool except tool 4.
On the main screen, I can see T04 but the turret will not rotate.
If I ask for any other tools, the turret will index without any problem, any idea.
Thanks, Jeff
Sounds like you might have a short for tool 4. With the turret at say tool 1, you should have 0v DC when measuring from J13-3 (tool 1) to J13-11 (0v). Without moving the turret also measure from J13-6 (tool 4) to J13-11. If you have 0v from J13-6/J13-11 then you do have a short. There's a terminal strip inside the back of the turret, you can unhook J13-6 (T4) on first the turret side then the control board side and see which gives you 0v between J13-6 and J13-11 to determine if the short is in the cable or the turret. If it's shorting in the turret, that will be... fun...
Thanks, your help is appreciated.