Set Up MTConnect with Fagor 8055M
We have 6 machines with Fagor 8055M controllers. From what I have found online, these controller support the MTConnect standard (and are possible bundled with an adapter - https://govimana.com/201536fagor-aut...tware-partner/), but I have been unable to find any information on what I need to get it up and running on the controller side of things.
It seems that there are plenty of pieces of software that will read and interpret the MTConnect data, but I'm trying to figure out what I need to get the controllers to output that data.
Does anyone have any experience with setting up MTConnect with these controllers that can point me in the right direction?
Re: Set Up MTConnect with Fagor 8055M
you are correct, you need to contact FAGOR for the correct solution for your cnc model. it is a payed solution.
normaly for cnc8055 you will need an external PC to install the agent.
after the instalation you will get a webserver with MTconnect raw data served. any browser can access this webserver and show a table witth all available data.
you can use this as a low cost sample to get the data...but you must write your own html/css/javascript to do what you want.