2 Attachment(s)
Re: Joe's CNC "TITAN Series"
Installed an X2 style spindle on my machine. I decided to remove all electronics from the head and relocate them, Also painted the head I think it looks cleaner.
Mind you this is not the norm for installing a mill head on a cnc router. I will be using the machine mainly for Aluminum and other hard materials. Most people will be installing a router.
Re: Joe's CNC "TITAN Series"
Joe, any more details on this new machine? Looks very nice but I see nothing on your website about it.
Don
Re: Joe's CNC "TITAN Series"
Quote:
Originally Posted by
atwooddon
Joe, any more details on this new machine? Looks very nice but I see nothing on your website about it.
Don
I am going to be building another one for sale. and post pictures.
Re: Joe's CNC "TITAN Series"
Very nice build, looks great and should prove popular I would think!
cheers, Ian
1 Attachment(s)
Re: Joe's CNC "TITAN Series"
Surfacing the Titan Desktop Bed. I Can not see any witness lines. after completion of build the bed was off 0.005" left to right and 0.003" front to back. this may be the differences in the MDF and Glue on the two layers, Surface is 0.02" removal.
https://www.youtube.com/watch?v=L8KiuOWvCUQ
Attachment 263036
Re: Joe's CNC "TITAN Series"
Quote:
Originally Posted by
joecnc2006
Surfacing the Titan Desktop Bed. I Can not see any witness lines. after completion of build the bed was off 0.005" left to right and 0.003" front to back. this may be the differences in the MDF and Glue on the two layers, Surface is 0.02" removal.
Clean machine, Joe! Nice build. Looking forward to seeing more!
Re: Joe's CNC "TITAN Series"
Was just going over the 2006 model and now thinking I may wait, wanted to make mine out of aluminum. This one looks very heavy duty compared to the 2006 model.
Looks great Joe cant wait to see what happens next.
Re: Joe's CNC "TITAN Series"
Re: Joe's CNC "TITAN Series"
4 Attachment(s)
Re: Joe's CNC "TITAN Series"
Wanted to try a little 3d relief on the Titan.
6061 Alumn.
1/8" Ball nose
1% step over
the piece cut is 3" tall
Took a little over one hour 60ipm all axis
No Roughing pass.
Next Will be a Roughing Pass and a 1/16" Ball Nose
Attachment 271344
Attachment 271346
Attachment 271348
Attachment 271350
Re: Joe's CNC "TITAN Series"
Very nice work! The machine looks great!
cheers, Ian
2 Attachment(s)
Re: Joe's CNC "TITAN Series"
1/8" end mill for roughing pass
1/16" Ball nose for finish pass
Same Size as Previous Test
Attachment 271710
Rough Pass
Attachment 271712
Final Pass
Re: Joe's CNC "TITAN Series"
Hi, is this project scrapped or are you planning on doing anything with it? Im looking on building a machine for aluminium cuts, and this looks pretty right to me.
How did the one you built for someone turn out?
Re: Joe's CNC "TITAN Series"
Joe - Are the TItan Series CNC plans available through your site?
Re: Joe's CNC "TITAN Series"
Wow this setup seems perfect for my needs. I'm looking to mill aluminum sheet so the build area is perfect. What's the cost to build one of these? I know I'm reviving an old thread, but this is perfect.
Re: Joe's CNC "TITAN Series"
Very nice work! The machine looks great!
https://getbestjigsaw.com/
Re: Joe's CNC "TITAN Series"
Thank you for sharing this Machine looks Awesome
https://gadgetspath.com/
Re: Joe's CNC "TITAN Series"