Re: Cincinnati Milacron 250t
Still haven’t figured this out Is there someone here that can change the battery and reflash my card? I’m in Canada but will ship.
Re: Cincinnati Milacron 250t
It is telling you that you may have a keyboard button stuck on at startup. Hold the SHIFT and ESCAPE buttons at startup and go through the button test. Turn switch #1 on (service) and press the service on the screen. Press the top button ? int, on the right side you should see words ( mach air, x ot, z ot , x align sw, z align sw) and things like that.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
Re: Cincinnati Milacron 250t
No change when I ran the key test there was some keys that didn’t produce a response and the keys on the left side of the keyboard continuously cycle through it’s cycle, switching #1 switch changed nothing pushing any button it just remained on initializing host. No hydralics either.
The keys that didn’t respond are:
EDIT, PROGRAM MGMT, MDI, RUN
BS, ENTER, CTL, ALERT RESET,
OPT STOP, RAPID OD, COOLANT OFF.
ON NUMERICAL KEYPAD:
0, -, AND DECIMAL
ALL BLUE BUTTONS TO THE RIGHT OF KEYBOARD
The hand wheel also shows no response
Like before the keyboard passes when started but show fails during the test I have another operator console I’ll try to see if there is any difference I know that this one has stiffer keys than the one in it now.