Windows key in PathPilot

I am trying to figure out how to get the windows key to bring up the terminal screen that has the internet selection on it, kind of a head scratcher here.

My other machine computer it works, the old one it works on the harddrive but not on the ssd I just installed, all have 2.7.2 updates, and all three drives connect to the internet but only two of them that the windows key works on.

I think the bootup would be faster still if I could get rid of all those machine pictures as its booting up??

I just proved to my self again that PP can beat me at every trip of the turn ha!!

pic of the window that comes up when striking the windows key


https://www.cnczone.com/forums/attac...d=460418&stc=1

Quote:

---

Originally Posted by popspipes

pic of the window that comes up when striking the windows key


https://www.cnczone.com/forums/attac...d=460418&stc=1

---

Hi Mike
That's the menu I get when I press the windows key but I had assumed that was because I'm running PP from the desktop. Does this also appear if you boot directly to PathPilot?
Step

Booting directly, it does nothing here.

(;-) TP

Quote:

---

Originally Posted by TurboStep

Hi Mike
That's the menu I get when I press the windows key but I had assumed that was because I'm running PP from the desktop. Does this also appear if you boot directly to PathPilot?
Step

---

It does work on the machine as well, kind of handy if you are changing things. It also works on my old computer connected up on my desk to use as a simulator to change files around etc.. It just dosnt work on the ssd that I put in the old computer I have a feeling it has to do with the sequence of updates or something similar. Pathpilot is very good machining software but leaves a bit to be desired on the programming end of things.......