Okuma MC-4VAE with 5020m Controller
Hello, so I just bought this new machine. When we bought it it needed a new board. First we sent it off to be repaired and it worked for about 30 mins. So we bought a new one and installed it but before we installed it we had a company come and check the motor (which they disconnected it) and such. Now with the new board we are getting new alarms with are 203-X or 203-y SVP velocity or SPV Dif. I believe this is an encoder issue with the research I've done. Something about resetting it, but being completely new at this I could really use some help figuring this out.
Re: Okuma MC-4VAE with 5020m Controller
Thanks for the confirmation on my theory, I have found a little bit on it but I don't really understand it, I did try to reset it once but it didn't seem to fix it and it reset to its original settings when I restarted the machine. If anyone has some guidance that would be amazing.
Re: Okuma MC-4VAE with 5020m Controller
Okay so line 16 in bit 7 is already 1.
I made it to the parameters page, and idk what to do next, I've never done anything like this. This was the page I tried on the first time though but maybe I did it wrong.
Re: Okuma MC-4VAE with 5020m Controller
Does anyone have like a list to follow? Or could explain me through it the best you can?
Re: Okuma MC-4VAE with 5020m Controller
hello i have mc4vae with osp 5020, do you need help ?
Re: Okuma MC-4VAE with 5020m Controller