Hello, can you help me with HP UHU BOARD
I'm looking urgently
I have been for a while looking for REAL HP UHU BOARD kit!
Have been in contact with Paul & Mr. Kreutz, but That report themelves absent.
And have had contact with Henrik Olsson-which lapels me to you.
You are my last hope
do you know where I have a REAL HP - UHU BOARD or kits can purchasePlease
Hoping for a speedy mail
Thank you to help me
Yours sincerely
PIERAERD Frederik
Email = [email protected]
PS MITSUBISHI MOTORS SERVO
1.1 Kw DC Brush / 180 VOLT Nominal 11 amps peak 67 amperes
Re: Hello, can you help me with HP UHU BOARD
Hello;
I am sorry for the delay, I seldom read the posts on this forum anymore because of the lack of free time. If you are still interested in the HP-UHUs I could email you the Gerber and NC drill files so you can order the PCBs from a PCB manufacturing facility and make your own drives using the part lists already on the forum. Henrik can probably sell you the CPU modules for high pulse/rev encoders or you can get the original UHU chips from Uli.
Best regards,
kreutz
Re: Hello, can you help me with HP UHU BOARD
I still have my HP UHU boards. Still have plans to use them. So many projects. So little time. Does Henrik still sell the CPU modules?
Re: Hello, can you help me with HP UHU BOARD
I am pretty sure he is still selling them...
Regards,
kreutz