Re: Im a dumb student.....
Re: Im a dumb student.....
Imperfect word means the Fanuc cnc doesn't recognize what you've fed it.
Example? Pictures? Code?
I used to work for Doosan, and I have the training manuals I wrote, if you'd like.
1 Attachment(s)
Re: Im a dumb student.....
hi
when in manual guide the softkey start is pushed [softkey]
you can select start program , start new operation , ect
when you select start program
something like apears
G54
G40 G80 G90
G50 S2500
T?
G? (G96/G97) S? M03 P11
every time you see a "?" sign, you change the word
So T? for example
first select the word so that T? becomes yellow
then you type 0101 for tool nr 1 offset nr 1, and the press the alter key
then it says T0101
same is for all the other "?" signs
hope this helps
https://manualzz.com/doc/23340305/ma...rning-examples
greetings bertus
Attachment 461424
Re: Im a dumb student.....
hi
tool calibrator, when i push it down it just goes backup...
try cleaning the base of the arm .
or push the button ones:)
bring the toolpoint close to the thing with the 4 thingies ,and then move the tool in jog mode to the sensor
this sould go slow and if made contact it will auto retract and make the change in the offset for that tool
greetings bertus
Re: Im a dumb student.....
Why are you not in the NC programming screen ?
Re: Im a dumb student.....
Re: Im a dumb student.....
Yes on that machine there is another NC screen right ?
You are on the simulation side of things ?
1 Attachment(s)
Re: Im a dumb student.....
hi
No this is the EDIT "side" like it say's on the top rigth corner of the screen in manual guide I
Attachment 461488
greeting, Bertus.nl
Re: Im a dumb student.....
I think it is on the System Screen i just cant remember but it says NC and it is white with black lettering ---------Only time i ever seen or used that side was for simulation and its blue and grey ---------------These are the Fanuc quick edit screens and stuff and really are an other attempt at conversational programing --------Good luck