Dyna Myte DM2800 Retrofited Control & Axis Drives

Attachment 426952
Following some of the other build threads on here I managed to get my DM2800 running!
I'm using:

• Mach3 version 3.043.062
• Warp9 Ethernet SmoothStepper
• Gecko G540
• IBM Pentium 4 PC

Wiring Schematic with markups:
Attachment 426928

P852 Stepper Motor to G540 DB9 Pinouts:
Attachment 426930

What the control cabinet looked like when I started:
Attachment 426942

Overview of the control cabinet finished:
Attachment 426944

ESS mounted where the old Distribution Board mounted using existing holes:
Attachment 426946

Gecko G540 mounted to original drive brackets:
Attachment 426948

120 mm fan attached below G540 using original drive brackets and fender washers:
Attachment 426950

Link to a YouTube video of it running:
https://youtu.be/cSbDXxkNvPw

I'm out of room for attachments so I'll make another post with more detail including the Mach3 configurations.
Steve

I just realized the replies display before the original post so please page down.

General Configuration:
Attachment 426954

Home / Limits
Attachment 426956

Input Signals 1/2:
Attachment 426958

Input Signals 2/2:
Attachment 426960

Motor Outputs:
Attachment 426962

Motor Tuning (X, Y, & Z are all the same):
Attachment 426964

Output Signals:
Attachment 426966

Spindle Setup:
Attachment 426968