Exception [24,5] - NCI(8,3): Communication with the CNC does not work! Morbidelli
Greetings
I need help with this error that I encountered on a Morbidelli Autor 600 kXLS CNC machine after changing the battery of the numerical controller. I have contacted SCM but they have not given me a solution.
The error is as follows
Exception [24,5] - NCI(8,3): Communication with the CNC does not work!
Re: Exception [24,5] - NCI(8,3): Communication with the CNC does not work! Morbidelli
Did you shutdown the whole system all the way to the main switch after youv'e changed the batterie ? And does your main was at off when youv'e changed the batterie ? Changing the batterie while the main is off might cause data loss. I work on scm morbidelli N200 & Morbidelli universal 3615, and when the exception 24,5 occur shutting down 3/4 of time solve that problem.
Re: Exception [24,5] - NCI(8,3): Communication with the CNC does not work! Morbidelli
Hi Greg
I have the same issue did you find a solution?
Thanks
Jason
Re: Exception [24,5] - NCI(8,3): Communication with the CNC does not work! Morbidelli
Had this issue and I believe i had to change the baud rate