CNC parts request

Hi guys I know this is not the correct place to put this thread but I dont see another place here to do it.

I make a good amount of aluminum parts that I sell and want to farm out some of the parts to someone.

The problem is the quantity is generally under 100 and most the time 50 would be OK.

If you have a mill and want some extra work let me know.

I attached a picture of one of the parts.

Feel free to email me at

[email protected]

Thanks
David Clements

Which part in this picture specifically are you looking to have machined? Thanks

-Josh

Quote:

---

Originally Posted by arizonavideo

Hi guys I know this is not the correct place to put this thread but I dont see another place here to do it.

I make a good amount of aluminum parts that I sell and want to farm out some of the parts to someone.

The problem is the quantity is generally under 100 and most the time 50 would be OK.

If you have a mill and want some extra work let me know.

I attached a picture of one of the parts.

Feel free to email me at

[email protected]

Thanks
David Clements

---

Are you in Arizona? I'm in Gilbert and a little slow lately. I could entertain some RFQ's.

Didn’t know you were on here too wheelie.

Anyways I have a vmc getting real lonely. Ever since I got a mill turn the vmc stays quiet.

I’d be interested I typically do small runs and 50pcs is a good size order to me. Feel free to pm me and I can shoot an email address for you to send models/ drawings to

Will you consider a China machining shop?
I'd like to try, contact me [email protected]
We are good at low quantity parts under 100