G41 G42 not working

I have a 1990 Bridgeport V2XT mill that I updated with an Allin1 control jan. 2020.

My problem is I can not get cutter compensation to work. I have wrote a small code to test and changed it up a couple of different ways and no luck.

I know you need to use a lead in line to start the compensation. Thanks for any help.

;tool offset
T6 M6
S1500 M3
G40
G20 G90 G17 G54
G0 X-2 Y2
G41 D6
G1 X-1 Y1 Z.050 F20
G1 X-1 Y0 Z-.100
X2 Y0
X2 Y-1.5
X0 Y-1.5
X0 Y0
M25
M05

Attachment 446520

What diameter value do you have in your offset library for D6?

.500"

I forgot to tell you, Iam a liar. HaHa.

I put 1/2" in the tool library not the offset library. All is great now and the learning curve continues.

CNCSNW thanks so much.