RFQ Racing engine valve cover engraving

Would like to know what it would be to get my valve covers engraved. And possibly filled with some color. Here is the logo.

Thanks

Steve Vance
704-701-4235---cell
704-944-5000--ext 1045 Joe Gibbs Racing

http://www.svrehorsepower.com/pics/SVRE.JPG

Do you want it outlined or pocketed?
www.hobbymachine.net

Quote:

---

Originally Posted by S V R E

Would like to know what it would be to get my valve covers engraved. And possibly filled with some color. Here is the logo.

Thanks

Steve Vance
704-701-4235---cell
704-944-5000--ext 1045 Joe Gibbs Racing

http://www.svrehorsepower.com/pics/SVRE.JPG

---

are they alum...... smooth
ill show you something friday

How many? Do you have a picture of the valve cover? Doing this on a flat surface VS a rounded surface will be quite different. What size do you want the engraving done?

I was wanting to have it pocketed so I could put some color in it. The valve covers are flat. Would have about 5-10 sets done at a time.

Steve

I sent a quote by private message
thanks mike

Quote:

---

Originally Posted by S V R E

Would like to know what it would be to get my valve covers engraved. And possibly filled with some color. Here is the logo.

Thanks

Steve Vance
704-701-4235---cell
704-944-5000--ext 1045 Joe Gibbs Racing

http://www.svrehorsepower.com/pics/SVRE.JPG

---

This kind of work goes for $108 per set after the first run of 10 sets.
Colors are extra.