New to Aspire CNC, questions

Hi guys, First let me say I appreciate any help I can get.
I was trained just 4 hours ( if that's what you could call it). I have never operated a CNC or any type of router machine before. I operate paper packaging machinery I.E: Bobst gluers and die cutters. So you can imagine its been a learning curve I'm navigating. The person who trained me previously operated the machine a year ago had a hard time remembering everything. I had to figure out a lot on my own. These forums are a blessing. I operate a CNC Trident 4010. Aspire 9.5 is the software used. I would like my tool to travel higher over the material. I'm not sure where to find the setting for travel height. If anyone could throw me a some knowledge I would be grateful. Thanks in advance.

I don't have answers to your questions, but I moved your thread to the Aspire forum, and added "Aspire" to the thread title. ;)

I finally figured it out. Its in the material Set up on Aspire. I appreciate you moving it to the right thread.