Avoid EdgeCAM at all costs!
My first post here. I've been programming at my new job for two months now, and went away on training but no matter how much I use it, I can't warm up to it. I started with MasterCAM, then Gibbs, but EdgeCAM takes the cake for works CAM software I've ever had the misfortune of using.
If any of you are professional programmers, here is what you'll have to look forward to on the 3 axis package. I realize I'm using the default post but my local reseller hasn't been willing to help me set up a post for my machine.
- Very annoying to draw wireframe/geometry especially arcs
- Cannot extend a line once it is drawn
- Cannot pick a drawn point for where a hole center is located
o Often cannot select drawn geometry for a tool to follow (“Entity not found”)
- Sometimes an error regarding file saving might pop up and if it does, all functions within Edgecam are impossible. Clicking will not result in anything, and the program must be shut down from the task manager
- “Internal errors” with no possibility of troubleshooting; functions are aborted with no explanation
- On the default vertical mill post, some feed rates default to 950 IPM for no reason at all
o As well, this post ignores fixed axes for tool changes (moves all 3 home no matter what)
o Move tool home doesn’t generate a G28 Z0, it just moves Z to ~24”
- Green dots appear all over the part in the stock layer when stock is updated. These serve absolutely no purpose to the user and get in the way of selecting geometry
- Cannot change direction/angle of cuts on face mill or parallel lace
- Selected geometry on many cycles cannot be changed after the fact and must be deleted if any changes wish to be made
- Any changes made to the appearance (hiding of toolpaths, machine, fixtures, tools, etc.) will be undone when the file is closed
- When using “reload solid,” sometimes the new one will not line up, and if you try to move it, you will not be able to because it says, “cycles need to be regenerated” no matter what
o You will be prompted to reselect geometry but they cycle in question is not specified, so you are left to select geometry blindly
- When using the “edge loop” feature (similar to curve edges in MasterCAM), non-connecting edges will require you to use edge loop once for each segment that is not attached
- Sometimes when toolpaths are made not visible, they cannot be turned back on
- When browsing files, you can’t type the directory, it’s only drop-down menus
- When defining a tool, max spindle speed is ignored and changes anything above 10,000 to 9999 RPM
Re: Avoid EdgeCAM at all costs!
sounds like an awful expensive 2 months for 3 software packages . What was wrong with the other 2 software's
Re: Avoid EdgeCAM at all costs!
Resellers are pretty useless and many don't know the software they are selling so you won't get much help from resellers. There job is to extract as much money from your wallet as possible so they will help with the post processor for the right price. For the software bugs you'll most likely have to deal with Edgecam directly and wait for a service pack.
Re: Avoid EdgeCAM at all costs!
Hello!
I have been using Edgecam for several years now. And there is some bugs... But Vero software, that`s making Edgecam, has come with two software release each year (Edgecam R1 and Edgecam R2) And they also come with up to 10-15 Service updates for them.
So Edgecam is a program that is keeping forward with newer things and updates, that also causes bugs....
Some of the bugs you are telling here, picking entities etc.. may causes by a bad graphic card driver. So try to check for some new/better drivers.
The resellers, I have been told on the forum here that the resellers many places are very bad. Im from Norway, and i need to tell you people that i think we have the best reseller for Vero/Edgecam. They are amazing!
BUT, if you have problem with the resellers, TALK TO VERO SOFTWARE! :) tell them what problems you have!
Contact Vero Software | Vero Software
I use Edgecam almost every day in the week, and i have a perfect job (for me:) with modelling, programming and machining. And i love Edgecam.
It is some bugs, but every program has that.
Vero have a system that customers can report bugs or problems to them to fix the issues.
Sorry for hearing that you don`t get help. But try to contact Vero, and tell everything!
Greetings from Robert.
Re: Avoid EdgeCAM at all costs!
Quote:
Originally Posted by
smegger
My first post here. I've been programming at my new job for two months now, and went away on training but no matter how much I use it, I can't warm up to it. I started with MasterCAM, then Gibbs, but EdgeCAM takes the cake for works CAM software I've ever had the misfortune of using.
If any of you are professional programmers, here is what you'll have to look forward to on the 3 axis package. I realize I'm using the default post but my local reseller hasn't been willing to help me set up a post for my machine.
- Very annoying to draw wireframe/geometry especially arcs
- Cannot extend a line once it is drawn
- Cannot pick a drawn point for where a hole center is located
o Often cannot select drawn geometry for a tool to follow (“Entity not found”)
- Sometimes an error regarding file saving might pop up and if it does, all functions within Edgecam are impossible. Clicking will not result in anything, and the program must be shut down from the task manager
- “Internal errors” with no possibility of troubleshooting; functions are aborted with no explanation
- On the default vertical mill post, some feed rates default to 950 IPM for no reason at all
o As well, this post ignores fixed axes for tool changes (moves all 3 home no matter what)
o Move tool home doesn’t generate a G28 Z0, it just moves Z to ~24”
- Green dots appear all over the part in the stock layer when stock is updated. These serve absolutely no purpose to the user and get in the way of selecting geometry
- Cannot change direction/angle of cuts on face mill or parallel lace
- Selected geometry on many cycles cannot be changed after the fact and must be deleted if any changes wish to be made
- Any changes made to the appearance (hiding of toolpaths, machine, fixtures, tools, etc.) will be undone when the file is closed
- When using “reload solid,” sometimes the new one will not line up, and if you try to move it, you will not be able to because it says, “cycles need to be regenerated” no matter what
o You will be prompted to reselect geometry but they cycle in question is not specified, so you are left to select geometry blindly
- When using the “edge loop” feature (similar to curve edges in MasterCAM), non-connecting edges will require you to use edge loop once for each segment that is not attached
- Sometimes when toolpaths are made not visible, they cannot be turned back on
- When browsing files, you can’t type the directory, it’s only drop-down menus
- When defining a tool, max spindle speed is ignored and changes anything above 10,000 to 9999 RPM
Hi
1. use the arc dialog command, it's fairly straight forward
2. Extend a line by using Trim first, because in order to extend a line you need something to extend to.
3. Hover over the drawn point and press F to retain it.
4. Right click and make sure intellisnap is turned on.
5. Is normally a file location/ network problem. If it's freezing, activate a PCI and it normally unfreezes it.
6. Internal errors are to do with incorrect selections within cycles. (asking it to do something that can't be done e.g. milling past the depth of a blind pocket)
7. sounds like your post is set for hi feeds at rapids.
8. When selecting move to tool change, lock the x and y. (to make it modal, right click the modifier and select customize)
9. in the code wizard, go to rapid to toolchange and insert G91 G28 Z0.0
10. The green dots you see are the points of the stl stock model. Try shading the stock.
11. yes you can. Alter the angular modifier and the left/right options.
12. course it can, either clear out what's already selected with the reset all picks or just press the reselect within the cycle
13. This is because your template is set to show all these features in the first place. Saving should sort it out.
14. If the solid has been modified on your alignment faces, it can't line up. You can still align it using the initial alignment command. Click the auto regen button to off.
15. In preferences select highlight instructions and they will go yellow when the regen stops.
16. Try using profile from edges instead of loops, if the model is of poor quality, use geometry from edges to create a 2d wireframe.
17. Right click the tool and press display layer, or press stop on the simulation if display all set ups has been turned off
18. seems fine to me
19. this is because you have 9999 set in your post and have use max rpm from code generator active..
20...Either, Stay away from cam systems or Invest in some training and Learn to use the software before you condemn it, as you'll find it can cope with any job you throw at it if you know what you're doing.
Re: Avoid EdgeCAM at all costs!
Thanks Phil!
That was a nice reply :)
I use a lot of time to understand Edgecam too, but here in Norway we got very good service that take care of us :)
But if you have some questions Smegger, just feel free to ask!
Greetings from Robert.
Re: Avoid EdgeCAM at all costs!
Quote:
Originally Posted by
Vegabond
Thanks Phil!
That was a nice reply :)
I use a lot of time to understand Edgecam too, but here in Norway we got very good service that take care of us :)
But if you have some questions Smegger, just feel free to ask!
Greetings from Robert.
I'd do him a post as well, but he'd probably want it done for nothing as it sounds like he's using pirate software.
Re: Avoid EdgeCAM at all costs!
Thank you for the very detailed reply. It's getting better, I must admit. As for training, I attended a 4 day course but it was nowhere near in-depth enough for what I need it for. My main complaint is just that edgecam is not intuitive/user-friendly enough. I like to think I have a pretty firm grasp on programming and I was able to pick up fusion 360 within a few hours, but maybe edgecam and I are both just too stubborn.
Re: Avoid EdgeCAM at all costs!
i have edgecam older version 2007 but for some reason i can not find mill option it only shows turn
why is that?