Re: Yaskawa Varispeed 626VM3 Help
Quote:
Originally Posted by
ggtech
Mine is now fixed. Measure your thermistor before doing anything. Mine turned out to be working. It should show some resistance. Blast it with cold air from a computer cleaner can, it should change.
In my case it ended up being a bad trace on the board going from the the ribbon connector to a capacitor on the board. Had to take it to a repair shop and it took the technician some time to find the fault. He ran a wire between the 2 points.hope this info helps others.
So had the cap damaged the trace, this can be a common problem, capacitors should be changed every 5 years in these drives, if you have the manual, it will tell you to do this to prevent damage to the boards.
Re: Yaskawa Varispeed 626VM3 Help
Quote:
Originally Posted by
mactec54
You would not wire the pot to anything, to do with the thermistor
heatsink thermistor 25.53 ohms - temperature reading V1-13 -28.0 C
Motor thermistor 7.5 ohms - temperature reading V1-12 25.2 C
any way to trick the input with a Pot to get a reading 0f 7.5 ohms for the heatsink
Re: Yaskawa Varispeed 626VM3 Help
Do you have photos of the bridge I made?
Re: Yaskawa Varispeed 626VM3 Help
Hello Guyz!
Quote:
Originally Posted by
ennab1977
I have the same problem
but what you mean by a power supply problem ?!
is it control power supply
or power interface card power (fuses & transformers are working properly )
and starting the drive (not installed in the machine) by supplying 3 phase 220 VAC with an electrical contactor and contected to an encoder to avoid encoder problem !!
power supply control output of the power supply as follow at 24 CN
1. Ground
2. Ground
3. 5 VDC
4. 5 VDC
5. 15 VDC
6. -15 VDC
7. 24 VDC
8. 5 VDC
Any suggestions !!!!???
Can anybody else confirm this pinout?
By my power supply I cannot measure any voltage by the output connector, so it seems to be broken. I found a replace part with the following rated current output:
5V / 15A
24V / 2.7A
15V / 2A
-15V / 2A
What do you think, is this enough?
Thanks,
Gábor