ATP keeps failing in Macro

I keep failing in the same spot and don't know why. New to me machine.
I keep ending up at 49 stating that "#3000= 85 (SETTINGS 59-334 AND MACRO #10582-585 NOT EQUAL)"
but I have checked them over and over and the probe settings

User Macros on Left and Settings on Right.
10582 = 59
10583 = 60
10584 = 333
10585 = 334

I don't know anything about Haas Macros so help would be appreciated.

Code:

O09120 (HAAS LATHE SETTINGS CHECK) (CREATED FOR NGC 8/28/2017) G103 P1 #10= #1 (CHECK FOR SETTINGS ZERO) IF[ [#20059 + #20060 + #20334] EQ 0 ]GOTO10 IF[ [#20059 * #20060 * #20334] EQ 0 ]GOTO48 GOTO20 N10 (CHECK MACROS ZERO) IF[ #[ #10 ] + #[ #10 + 1 ] + #[ #10 + 3 ] EQ 0] ]GOTO48 IF[ #[ #10 ] * #[ #10 + 1 ] * #[ #10 + 3 ] EQ 0] ]GOTO48 GOTO100 N20 (CHECK MACROS NOT ZERO) IF[ #[ #10 ] + #[ #10 + 1 ] + #[ #10 + 3 ] EQ 0] ]GOTO45 N30 (CHECK SETTINGS EQUAL MACROS) IF[ [ #20059 * [ 1. + #20285 ] ] NE #[ #10 ] ] GOTO49 IF[ [ #20060 * [ 1. + #20285 ] ] NE #[ #10 + 1 ] ] GOTO49 IF[#20334 NE #[ #10 + 3 ] ]GOTO49 IF[#20333 NE 0 ]GOTO50 GOTO100 N45 (PUSH SETTINGS TO MACROS) #[ #10 ]= #20059 * [ 1. + #20285 ] #[ #10 + 1 ]= #20060 * [ 1. + #20285 ] (#[ #10 + 2 ]= #20333) #[ #10 + 3 ]= #20334 GOTO100 N48 #3000= 84 (CHECK PROBE CALIBRATION) N49 #3000= 85 (SETTINGS 59-334 AND MACRO #10582-585 NOT EQUAL) N50 #3000= 86 (SETTING 333 MUST BE ZERO) N100 M99