Re: Gibbs New Interface/ Trash Can Missing
Quote:
Originally Posted by
Sierevello
Okay I went to the Gibbscam Quick Start Guide just to make sure I wasn't crazy and it shows the process bar where it should be. It also shows the pin that mdlmkr was talking about. I just need to find out how to get the thing turned back on so I can pin it in place,
I have tried right clicking down there and everything else I can think of and no luck and I can't find anything in the menus to turn it on/off.
Thanks.
Attachment 384810
Gibbs sent me another thing to try and it worked. It has returned to the bottom right part of the screen. It is below in case you ever experience it.
Please try deleting the User Preferences folder by following the instructions below:
Go to the Plugins menu at the top
Select Pathfinder
Select User Preferences
Close GibbsCAM
Delete everything within the User Preferences folder
Upon relaunching, GibbsCAM will rebuild everything that it needs.
Thanks for all of the help.
1 Attachment(s)
Re: Gibbs New Interface/ Trash Can Missing
It looks like you are missing the commands across the top too. Is that correct? If so, it may be a windows setting...I will check.Attachment 385850