File transfer via Ethernet TCP/IP

Hello Friends,

Currently have a Milltronics CNC Machine, which model is Centurion 7.

The issue that, I am unable to set a communication via Ethernet TCP/IP protocol (ethernet cable is connected to Machine and the other end is connected to wireless modem). May be I am trying to connect somehow wrongly, I don't know.
What kind of settings should I do on my PC and on CNC Machine directly, in order to share that folder with CAM files to Machine? Something is going wrong in communication...
Please advise...

All depends on the PC. Transfer the files to a XP computer then try it. If you are using Widows 10, good luck. If you are using Windows 7, it may work. Search this forum, There have been a few discussions about this topic.

I don't think you can hook up a wireless modem directly to your machine. You hook a PC (and yes, older Windows 7 or XP works best) to the machine and then wireless to that PC from your other PC if you like. The operating systems that Milltronics uses, at least in the older Centurion 5 and 6 machines was DOS, so no wireless directly to the machines control.

...this link may or may not help you.
https://www.cnczone.com/forums/millt...cam-posts.html

misfired reply