Re: RhinoCam + RICH AUTO A11
Assuming that's a legal seat of RhinoCAM you're using, Mecsoft will configure a post for you for free. Just send them a sample of some code that works with that machine and they'll do the rest.
Re: RhinoCam + RICH AUTO A11
Here is it:
https://dfiles.ru/files/h48gsytoi
This two pp was modifyed by me especially for DSP 0501 units from Ritzahong
Unpack it to Posts\ in rhinocam installation folder.
Choose appropriate pp from list.
QuickCNC.spm noARC don't generate F codes - you should set feed speed from DSP.
Also i meet rare bug when DSP proceed G02/G03 commands. noArc pp fix this.
Do not use G82/G83 (drill) - DSP shall not raise bit after drilling - it's DSP inner bug.
Re: RhinoCam + RICH AUTO A11
Quote:
Originally Posted by
awerby
Assuming that's a legal seat of RhinoCAM you're using, Mecsoft will configure a post for you for free. Just send them a sample of some code that works with that machine and they'll do the rest.
What kind of code I should send? How can I export it?
Re: RhinoCam + RICH AUTO A11
Set RhinoCam to output for a Mach2 or Mach3 target.
You may need to check you get absolute mode versus incremental mode for the generated G-Code.
That should give you some code for a starting point.
Re: RhinoCam + RICH AUTO A11
Quote:
Originally Posted by
corviche
What kind of code I should send? How can I export it?
You need a g-code program that works on your machine, preferably one that has all the routines you want to use. Save it as a txt file and attach it to an email addressed to the Mecsoft tech support team.