EzCad multiple pass

Hi all,

i use ezcad to make deep making, to do it i use: ( A ) one pass at low speed/high power 90degree + ( B ) one pass of same but 0 degree, and ( C ) one pass at hight speed/low power ( it is to clean the oxide) but need repeat it A,B,C many times. What´s happens is ,for ex. if i setup it to do A,B,C two times in looping the machine scan two times A than 2 times B than 2 times C but i need the machine scan one time A , one time B,one time C, and than repeat one time A., one time B, one time C. Do you know how to do it??

Hi, for the question about <a href="https://www.chineselaser.com/laser-control-software/" target="_blank">ezcad2 laser marking software</a>, you can log on to <a href="https://www.chineselaser.com/" target="_blank">ezcad website</a> to contact us.

I am Sue from JCZ. Any questions about <a href="https://www.laserchina.net/download/ezcad/" target="_blank">ezcad</a>, you can send your questions to [email protected]. I will help to solve it.