I am ;looking for some cam software that will work with my 1999 Mori Sieki SL-150 lathe with live tooling Fanuc 18i controller. Any suggestions would be much appreciated
Ray
Printable View
I am ;looking for some cam software that will work with my 1999 Mori Sieki SL-150 lathe with live tooling Fanuc 18i controller. Any suggestions would be much appreciated
Ray
You might take a look at VisualCADCAM from Mecsoft. Lathe CAM (VisualTurn) is now included in the Visualmill CAM package, and if there isn't a post already made for your machine, Mecsoft will configure one for free with your purchase.
Every software will work ok with Fanuc. Find one that would be most comfortable to use for You.