Weeke import 3D dxf

Using Wood WOP 4.5.

We have had good success using the dxf import function in WoodWOP. I can bring in contour lines or hole into WoodWOP using the pdf file. I have even managed to import tool paths from other CAM software as long as I can output the path in a dxf. It took some tweeking in the BPP.ini file to get it to work correctly.

What I can't do is import 3D lines. The woodWOP file is not accepting the Z coordinates from the dxf file. Had anybody else had any luck importing 3D dxf files?

Quote:

---

Originally Posted by Hopefulbull

Using Wood WOP 4.5.

We have had good success using the dxf import function in WoodWOP. I can bring in contour lines or hole into WoodWOP using the pdf file. I have even managed to import tool paths from other CAM software as long as I can output the path in a dxf. It took some tweeking in the BPP.ini file to get it to work correctly.

What I can't do is import 3D lines. The woodWOP file is not accepting the Z coordinates from the dxf file. Had anybody else had any luck importing 3D dxf files?

---

Here is the BPP.ini file I'm using in WoodWOP to help import DXF files. The DXF needs to have the correct layer names for the import to work correctly.

I just can't get it to import 3D lines. Let me know what I'm doing wrong.

Ting to attach.

Is IGES (or igs) an option? That's a more common format for 3D splines than DXF, which is usually just for flat lines, curves, and arcs.

I am unable to see the attachment.

Sent from my Redmi Note 4 using Tapatalk