CTEK Mill- X/Z Over Lag error
Ctek CNC Mill - KM100D
Machine suddenly stops while program is running and when machine is idle in manual mode. The alarm on screen shows an "x-axis overlag error".
When this occurs the machine moves fast a small distance in the x and z direction (out of tool path) which damages the tool and machining stock.
I have tried :
- Cleaning axis guides and lubricating.
- Running different programs.
Any help would be appreciated.
Thanks
Re: CTEK Mill- X/Z Over Lag error
Quote:
Originally Posted by
SrivanG
Ctek CNC Mill - KM100D
Machine suddenly stops while program is running and when machine is idle in manual mode. The alarm on screen shows an "x-axis overlag error".
When this occurs the machine moves fast a small distance in the x and z direction (out of tool path) which damages the tool and machining stock.
I have tried :
- Cleaning axis guides and lubricating.
- Running different programs.
Any help would be appreciated.
Thanks
More likely encoder/cabling/motor/drive issue. Have seen ctek with bad encoder (cold solders) and unbonded magnets in motors.
Reg. Mika
Lähetetty minun B15 laitteesta Tapatalkilla
Re: CTEK Mill- X/Z Over Lag error
Hi there i have EXACTLY the same problem (although it's the X/Y axis and i have had the sudden movement tto which damages tools and the job.
Did you ever find out what was wrong as i have no engineers in my area that can help.
Many thanks
Pete