I have a matsuura mc 510v and i just loose all the parameters , does any one has a parameter list that can be email to see if i can put the machine to work
i bought that machine use and i do not have any parameter manual
thanks
Printable View
I have a matsuura mc 510v and i just loose all the parameters , does any one has a parameter list that can be email to see if i can put the machine to work
i bought that machine use and i do not have any parameter manual
thanks
Did you get the parameters? I, too have a 510V and the parameter list if you need it. PM me if you do.
Hello.Quote:
Originally Posted by L98FIERO
I would really need Mx3 parameter list.
Hope someone can help me.
My email es [email protected]Quote:
Originally Posted by rodrigomex
rodrigomex,
What model Matsuura and about what year? I have Many parameters for Matsuura.
Actually, I need them for a Hitachi Seiki VM40H with a MX3 control, but the closest I had been able to find are for matsuura. I will try anything to get this machine running.Quote:
Originally Posted by freakycnc
Thanks
I just sent a copy of the parameters from my machine, do you have the definitions for the parameters for the MX3 on my 510V? I'd be interested if you do.
HelloQuote:
Originally Posted by L98FIERO
Thanks for you help.
I don't have definitions for each parameter. I found an old MX3 parameter manual, but only some of them are explained in that manual.
I thing every builder uses different parameters.
The builder usually use the 7100's parameters.
But each builder use the differently.