Maho MH 500W 532 CNC Controler
Hi
I just got a Maho 500W but I am missing sum English manuals, User and operation guide + the programmer.
The machine had claret all the machine parameter due to a defect 6V backup battery, after replays I enter all the parameter manual in it to forever, is it passably to upload the machine parameter over the serial port ?
I have XYZ axis up and running and can run a ref, but the B axis roundtable is not moving.
I hear a lot of noise from the hydraulic pump when moving the B axis, any ide on this ?
Re: Maho MH 500W 532 CNC Controler
Quote:
Originally Posted by
Aviaform
Hi F45CNC
Did you somehow figure out how to load the parameters through the serial port.
I have the manuals, but cant figure out how to input them in the machine
Any help will be appreciated
Thanks
Tommie Prinsloo
South Africa
I can help you - did you have got it solved by now ?
regards from toronne
Re: Maho MH 500W 532 CNC Controler
Hello guys. I have got lathe with philips 3580 cnc, and I started thread on the other forum about all philips controls.
We have some manuals and pc connection tips there. But we have no info about 532. And it differes from 432 etc. And people asking.
If you can help, please send me info.
parameters. manuals, correct serial port wiring and tips about pc connection.
I will translate it for our community.
Thanx in advance.
[email protected]