Catching Fish With CamBam
https://www.youtube.com/watch?v=d2U3nQD17Yw&t
Printable View
Catching Fish With CamBam
https://www.youtube.com/watch?v=d2U3nQD17Yw&t
Its a pretty simple project, but sometimes you gotta do what you gotta do.
Replacing the plastic insert with one that won't break on a band saw table.
No this isn't for my new saw. Its for the old wood cutting saw. I figured I should throw a new insert in it before moving it out of the shop into the garage. I busted the old plastic one a long time ago.
https://www.youtube.com/watch?v=2HfI-3ORrcc
Machining a tiny little aluminum fuel line T.
Everything done in CamBam except the cutting.
https://www.youtube.com/watch?v=_qZTQEpUmYY
CamBam helped me make a new dial for the vintage (early 1970s) Soviet kitchen scale. My dear aunt is still using it after all those years.
https://i.ibb.co/ZBQqGF5/IMG-20190907-125452w.jpg
The original picture on the dial was long gone, so I found a photo of a better preserved specimen and turned it into line art the best I could. Here is what it used to look like when the scale was new:
https://i.ibb.co/j6xFLgS/102153701.jpg
image upload
I built in RC Excavator using real hydraulics system all using CamBam. :)
https://www.youtube.com/watch?v=j9p_L_YgYYE&t=299s