Printable View
I have a VMC equiped with fanuc OM-C. It's Parameters got lost. Presently I looking for it's option parameters # 900. I have a backup of it's parameters but it does not contains 900 parameters. I would much appreciate for sending me option parameters along with every parameter bit description. Can I use Fanuc OM-D's 900 parameters instead of OM-C. Kindly help me to solve this problem.
AFAIK the 900 options are the same for both, send me a PM with an email address.
Al.
For future reference, if you press and hold the EOB key, then press output/start, whilst outputting parameters, the 900 parameters will also be punched.
send me an email I will send you a pdf file for all the Fanuc OM C parameter
Hopefully he has it running after 5yrs? :drowning:Quote:
Originally Posted by Indmach
Al.
i have hmc with fanuc omc. on screen x y z axis are display. but B axis is not display on screen. In B axis drive - is comming. In servo tuning menu B axis is not display. 8400 series also not display. i think B axis is by passed. can you pl guide me ?
[email protected]
Somebody can send me the parameters for 4th axys !!! Pleaseeeeee
Enviado desde mi GT-I9300 mediante Tapatalk
Hello: I'm in need of 900 parameters for a FANUC OM-C controller also. It's a Mitsubishi gear hobber. Model G15CNC.
Thank you in advance.
Send PM with email
Al.
hello, i also need the 900 parameters for the OMC. Mine is the simple version with one cpu doing NC and PMC. theres no seperate PMC and Graphics card. Its a retrofit with no tool changer. I have the regular parameters but didnt know that extra buttons were needed for more parameters. I could also use an explaination of the Diagnostic parameters since those wernt backed up either. I guessed at some stuff and got the machine to home but many things dont work. Digital spindle is not talking to the control, single block wont turn off, tool unclamp non functional, and lube pump only works in manual mode. Ill PM my email for any info you can send my way. I called Fanuc and they said its all proprietary and they can send a teem to me to reprogram my machine. It didnt sound very economical.
Sent
Al.
I also have a 0M-C that is acting strange. It won't allow me to edit any programs. The CAP soft key doesn't show up or the program list. I should be able to see the list of programs and hit "search" then the program number and input. At least that's how my other Miyano TSV's operate. This machine is new to me and someone may have tampered with the option parameters. Program protect key does toggle the correct bit. I have a 900 parameters list but there are a lot of blank spaces with no explanation. Any help would be greatly appreciated.
Dear fellow enthusiasts I have a full backup of an OMC vmc Victor Vc 80, if anyone needs a copy, please ask!!
Alguien me puede enviar una copia del manual de parámetros 900 para un Fanuc OT
Me puedes enviar los parámetros?Quote:
Originally Posted by Al_The_Man
See post #9 you have your private message shut off.
Al
No puedo enviarte, dice que has desactivado los PMQuote:
Originally Posted by Al_The_Man
No he desactivado el mío, pero el tuyo se muestra no activadoQuote:
Originally Posted by vortech
Check your email
Al.
Gracias (y)
Hi bro,
I need victor V center 80 om-c parameters
It would be of great help.
hello
give the serial number of the machine and an email.
[email protected]
I have attached the model details. But it doesn't show the serial number
Please send me it will be of great help.Quote:
Originally Posted by clevergenius
[email protected]
mail sent
I didn't receive any email :(Quote:
Originally Posted by zavateandu
please send me a copy of omc vmc Victor VC80
Quote:
Originally Posted by clevergenius
Is your offer still valid? currently I really need those machine parameters
please reach me on email : [email protected]