does any "non commercial" person have a copy of this and would be willing to share for sensible donation.
Printable View
does any "non commercial" person have a copy of this and would be willing to share for sensible donation.
hey there,,,i can easily create the code for you,,,,can i have details about the machine,,,,
keysoftwareservice.com
Hi,
Attached is a Post I wrote for a 3-axis OOYA Drill/Mill Bridge type machine with a Siemens 810M Control.
There will be some machine specific code that might need changing to suit your machine, you will also need to change the following sections of the Post to suit your machine
$743 Maximum Spindle Speed
$744 Fixed Speeds (As our machine had fixed Speeds, set to zero for Variable Speeds)
$753 Maximum Feed Rate
$900 XY Rapid Speed
$901 Z Rapid Speed
Let me know by PM if any changes need to be made.
Regards,
Frank.
In a attachement you can find VBA post for Sinumerik 840D, it is very similar.
If you will need some changes write me.
https://www.dropbox.com/s/43xsdr9rvw...0_XYZ.amb?dl=0
hi
i need a
siemens 810 M mill post for Autodesk PowerMill
thank you
....