Johnford vmc-1324 parameters

Looking for a source for the 900 parameters for my johnford vmc-1324 with fanuc o-mc control. Batteries corroded after 9 months and lost parameters. I do have all parameters except 900's. Always replace my batteries with new supposedly premium batteries yearly. Looks like I am going to energizer now. Any help would be appreciated.

Here is what I have I only know that it was from a Johnford vertical mill. You need to use alkaline batteries. And once you get your options parameters set press and hold the EOB key when you punch them out as this will allow the 900 to be saved with the rest of the parameters.

Quote:

---

Originally Posted by drdos

Here is what I have I only know that it was from a Johnford vertical mill. You need to use alkaline batteries. And once you get your options parameters set press and hold the EOB key when you punch them out as this will allow the 900 to be saved with the rest of the parameters.

---

It is a start. not correct but may be able to figure it out from there. Thank You.