Re: Mach3 no longer works in Windows 10 as of version 1803
I run the Windows version of Freecad under Wine
Have you tried running AutoSketch v10 under WINE? That would be nice.
Mind you, W7 & Mach3 with NO internet connection works fine on a production basis. Zero virus risk. File transfer by sneakernet.
Cheers
Roger
Re: Mach3 no longer works in Windows 10 as of version 1803
Quote:
Originally Posted by
RCaffin
I run the Windows version of Freecad under Wine
Have you tried running AutoSketch v10 under WINE? That would be nice.
Mind you, W7 & Mach3 with NO internet connection works fine on a production basis. Zero virus risk. File transfer by sneakernet.
Cheers
Roger
I don't have AutoSketch and consequently wouldn't know the answer.If you have it and could download an iso image of a Linux distro that will run live,you may be in a position to tell us if it does work.
I agree with the comment about older versions of Windows running perfectly well.Among my acquaintances,there is one who runs a router using XP with no internet connection and another runs a mill that is programmed in DOS.They both produce useful parts.
Re: Mach3 no longer works in Windows 10 as of version 1803
One of these days I will try that with Knoppix. I have the distro.
I was running my machine in production mode until it died - using WXP. I had to 'upgrade' to W7. The vendor was sstill not keen to supply that.
Cheers
Roger
Re: Mach3 no longer works in Windows 10 as of version 1803
Quote:
Originally Posted by
MyGarageShop
Good tip!
MM
Re: Mach3 no longer works in Windows 10 as of version 1803
Quote:
Originally Posted by
MicroMill
Good tip!
MM
If you have any questions feel free to message me