Printable View
Does anyone have any information about the Italian built press brake Mecos.
Is the company still active? I tried to email them and it was returned to me.
Has anyone used there machines and what is your opinion of the machine.
I am looking at the Mecos Mini 35 ton 4 foot press. I am concerned parts availability
may be a problem as I am in Washington USA and I cannot find a USA representative.
Thank you for your help
Before make your decision to purchase press brake, you should know it very well, hope below post can help you:
https://machinemfg.com/press-brake-ultimate-guide/
If you need something from Italy let us know. Anyway about Mecos normally we do not see them active...
Does anyone have seen a circuit board that handles +/- 10 Vdc to a hydraulic system for a press.
Please look at the picture posted, the circuit is pretty simple. It was built in the 1990's from Italian company.
This board goes into a base plug-in. It generates the voltage basic on a foot pedal which it activates a linear potentiometer installed at the foot pedal.
Any other questions can be send to [email protected] or text me at 509-869-0736
Thank you all
You can also read posts in this category, before buying press brake:
https://blog.harsle.com/category/press-brake/