Re: Huanyang spindle vs Zhong Hua Jiang spindle
I wanted to come back here @macter54 to revisit the information you shared. As you know I have the 2.2KW spindle but I am going to try to send it back.
I looked at the breakers that correspond to the room the machine is in at it is a 15A breaker. This room has several outlets running computer etc. This begs to ask the more important question. Should the plug the run the CNC control box and pc and VDF be on their own.
To give you some background info. I am upgrading to a spindle because I wanted more cut accuracy/ better side finish and we able to cut alum. The 2.2KW with its 4 bearings seemed rigid enough for the job.
Re: Huanyang spindle vs Zhong Hua Jiang spindle
Quote:
Originally Posted by
FoxCNC1
I wanted to come back here @macter54 to revisit the information you shared. As you know I have the 2.2KW spindle but I am going to try to send it back.
I looked at the breakers that correspond to the room the machine is in at it is a 15A breaker. This room has several outlets running computer etc. This begs to ask the more important question. Should the plug the run the CNC control box and pc and VDF be on their own
To give you some background info. I am upgrading to a spindle because I wanted more cut accuracy/ better side finish and we able to cut alum. The 2.2KW with its 4 bearings seemed rigid enough for the job.
One supply for your machine yes on it's own is the best choice
The machine should run from the same supply source or you will have a machine Grounding problem it can be done, but you can only use one Ground which is hard to do from 2 different outlets,a 15A supply and wiring in not going to work for a 2.2Kw 110v /120v supply, 800w spindle will run on a 15A circuit